Daily Equipment Check Checklist for E-commerce & Retail
A routine inspection checklist for verifying that all business equipment is functioning correctly and safely before daily operations commence.
Includes Australian Consumer Law (ACL) compliance features, GST calculations, and product safety record management.
Complete Checklist
- 1Visually inspect all major equipment for obvious damage or wear
- 2Power on each piece of equipment and verify it starts correctlyCritical
- 3Check all safety guards, covers, and protective devices are in placeCritical
- 4Verify emergency stop buttons are accessible and functioningCritical
- 5Inspect power cords and cables for fraying, damage, or tripping hazards
- 6Check fluid levels where applicable including oil, coolant, or water
- 7Test calibration of measurement or weighing equipment if used
- 8Ensure ventilation systems and exhaust fans are operating correctly
- 9Verify that equipment operating temperatures are within normal range
- 10Check consumable levels such as ink, toner, labels, or packaging materials
- 11Confirm backup or redundant equipment is available and functional
- 12Clean equipment surfaces and remove any debris or residue
- 13Log any abnormal sounds, vibrations, or performance issues
- 14Tag any faulty equipment with an out-of-service notice and report itCritical
- 15Record the daily equipment check completion in the maintenance log
Frequently Asked Questions
Who should perform daily equipment checks?
The operator who uses the equipment regularly is often the best person to perform daily checks, as they are most familiar with how the equipment should look and sound. However, they should be trained in what to look for and how to report issues. A supervisor should review the completed logs periodically.
What happens if faulty equipment is identified during the daily check?
Immediately take the equipment out of service using a lockout or tag-out procedure. Notify the maintenance team or relevant service provider. Document the fault and the date it was identified. Do not allow staff to use the equipment until it has been repaired and cleared for use by a qualified person.
How detailed should daily equipment checks be compared to scheduled maintenance?
Daily checks are quick visual and operational inspections designed to catch obvious problems before they worsen. They should take no more than 15 minutes. Scheduled maintenance is more thorough, involving detailed inspections, part replacements, and calibration. Daily checks complement but do not replace scheduled maintenance programs.
Need help implementing these checks into your daily operations?
Our team can build custom checklists integrated into your daily operations workflow.