Calibration Management Checklist for Manufacturing
A checklist for managing the calibration of measurement and testing equipment to ensure accuracy and reliability of quality-related measurements.
Designed to support ISO 9001 quality management, workplace health and safety regulations, and environmental compliance reporting under Australian standards.
Complete Checklist
- 1Review the calibration schedule and identify equipment due for calibration this monthCritical
- 2Check the calibration register for completeness and accuracy
- 3Verify that all measuring equipment is listed in the calibration register
- 4Confirm that calibration has been performed by a qualified and accredited providerCritical
- 5Review calibration certificates for completeness and traceability to national standardsCritical
- 6Check that equipment is labelled with its calibration status and next due date
- 7Verify that out-of-calibration equipment is removed from service until recalibratedCritical
- 8Assess the impact of any equipment found to be out of tolerance on previous measurements
- 9Review the calibration frequency for each instrument and adjust if needed
- 10Check that reference standards used for in-house calibration are traceable
- 11Inspect measuring equipment for physical damage that could affect accuracy
- 12Verify that environmental conditions for calibration are within specified ranges
- 13Update the calibration register with results and next calibration dates
- 14Report any calibration issues that may affect product quality to management
Frequently Asked Questions
What types of equipment need to be calibrated?
Any equipment used to make measurements that affect product quality, safety, or regulatory compliance needs to be calibrated. This includes scales, thermometers, pressure gauges, dimensional measurement tools, electrical test equipment, and flow meters. If a measurement device is used to make accept or reject decisions, verify specifications, or demonstrate compliance, it should be in your calibration program.
What should we do if calibration reveals equipment is out of tolerance?
Remove the equipment from service immediately. Assess the impact on any measurements or decisions made since the last valid calibration. If product quality may have been affected, investigate and take appropriate action such as re-inspecting affected products. Have the equipment repaired and recalibrated before returning it to service. Document the out-of-tolerance event and any corrective actions taken.
How often should measurement equipment be calibrated?
Calibration frequency depends on the equipment type, manufacturer recommendations, usage intensity, criticality of the measurements, and historical stability data. Common intervals range from monthly for high-use critical instruments to annually for stable, low-use equipment. Review calibration data over time and adjust intervals based on whether the equipment consistently stays within tolerance between calibrations.
Need help implementing these checks into your daily operations?
Our team can build custom checklists integrated into your daily operations workflow.