Electrical Safety Inspection Checklist for Insurance
A checklist for inspecting the safety of electrical installations, equipment, and work practices to prevent electrical incidents and comply with Australian standards.
Aligns with ASIC regulatory requirements, General Insurance Code of Practice, and AFSL obligations. Includes audit trail provisions.
Complete Checklist
- 1Check that the main switchboard is accessible, labelled, and free of obstructionsCritical
- 2Verify that all residual current devices are tested and functionalCritical
- 3Inspect all power outlets for damage, discolouration, or signs of overheating
- 4Check that portable electrical equipment has current test and tag complianceCritical
- 5Inspect power cords and extension leads for damage, fraying, or wear
- 6Verify that power boards are not daisy-chained or overloaded
- 7Check that all electrical work has been performed by a licensed electricianCritical
- 8Inspect outdoor electrical equipment for weatherproofing and protection
- 9Review the earth leakage protection for all circuits
- 10Check that electrical panels and meter boxes have adequate clearance
- 11Verify that warning signs are displayed near electrical hazards
- 12Inspect battery charging areas for ventilation and spill containment
- 13Review the lockout and tagout procedures for electrical maintenance
- 14Check that workers who perform electrical tasks hold the required licences
- 15Document all inspection findings and arrange repairs for any defectsCritical
Frequently Asked Questions
What are the most common electrical hazards in Australian workplaces?
Common hazards include damaged power cords and plugs, overloaded power points and power boards, contact with overhead or underground power lines, using electrical equipment near water, faulty or untagged portable equipment, and unauthorized electrical repairs. The most effective prevention measures are regular inspections, test and tag programs, RCD protection, and ensuring only licensed electricians perform electrical work.
Who can perform electrical test and tag in Australia?
Testing and tagging of portable electrical equipment can be performed by a competent person who has been trained in the procedures under AS/NZS 3760. This does not need to be a licensed electrician, although many businesses use electricians for this purpose. However, any repair or modification to electrical equipment must be performed by a licensed electrical worker.
How often must portable electrical equipment be tested and tagged in Australia?
Testing frequency depends on the environment. For hostile environments such as construction sites, testing is required every three months. For manufacturing and workshops, every six months. For offices and other non-hostile environments, every five years for most items. However, newly purchased items with a current AS/NZS 3760 or equivalent tag do not need immediate retesting. Always check state-specific requirements.
Need help implementing these checks into your daily operations?
Our team can build custom checklists integrated into your daily operations workflow.